Dear Sir:
Good days
This is Mr. Su ---International Marketing manager from YS vertical turret milling machine Taiwan
who can supply you high quality vertical turret milling machine.
YS vertical turret milling machine; the leader of the vertical turret milling machine manufacture in Taiwan.
High Quality Vertical (Horizontal) Turret Milling Machine
YSM-26 series Vertical & Horizontal milling machine
Max. table load 300 kg
Milling head (Belt driven) 20 Steps
Longitudinal travel (M./A.) 1000/1000 mm
Horizontal spindle speed(gear driven) 50HZ:73-1288 rpm(9 Steps)
As long as you have any Milling Machine inquiry
Definitely we can fulfill your need
Brochure、Video for reference !
https://www.youtube.com/watch?v=UWvaZ7tiRTA&t=110s
Y S (VAN) Machine Features as following
1. Dovetail & Square type with each machine model
| Design/ Model | 15 | 16 | 18 | 860 | 20A | 20B | 26 |
| X axis | △ | △ | △ | △ | △ | △ | △ |
| Y axis | △ | □ | □ | □ | □ | □ | □ |
| Z axis | △ | △ | □ | □ | □ | □ | □ |
△Dovetail design 鳩尾
□Square design 方軌
2. Milling Head type as following
| Milling Head | Spindle taper | Model |
| 1.5# | R8/NT30(ø85mm) | 15 series | | | |
| 1.6# | NT40(ø85mm) | | 16 series | | |
| 1.8# | NT40(ø105mm) | | | 18 / 860 /2 6 series | |
| 2 # | NT40(ø110mm) | | | | 20A / 20B series |
| Transmission Mechanism | High Gear | Low Gear |
| 1.8# (ø105mm) | Belt | Gear |
| 2.0# (ø110mm) | Gear | Gear |
3. 15/16/18/860/26 series Milling Head type as following
(A.) The main casting part is made of meehanite casting, and the machine body comes with square slot design. Excellent stability and rigidity.
(B.) All our X / Y/ Z -axis slide treated with high-frequency heat treatment after grinding, each sliding surface is attached glide piece(TURCITE-B) to reduce the friction force of the contact surface.
(C.) The spindle material is made by molybdenum steel (SCM21). Then we will carburizing heat treatment and precision grinding, so the rigid tough spindle can withstand heavy cutting.
(D.) The accuracies check of specification is based on ISO-10791
(E.) The spindle motor NOT ONLY provides either 8, 10, 16, 20 steps (Most other builders have 16 steps only) BUT also have variable speed; max speed 5560 RPM can meet different processing conditions then improve production efficiency.
(F.) Spindle speed (brake) is made by quick shift mechanism that had applied for patents (No. 88215880) .The shift can be changed in one go, convenient use. It can reduce the risk of mistakes and damaged also.
(G.) The Thickness of our Machine table is more than 86mm (expect for 15 series model), Most of the other builders only use 78~82mm. (ex: 26 series table thickness is 93mm)
(H.) We use type B belt drive (expect for 15 series model), Most of the other builders use type A. The B belt is stronger and more durable than the type A belt.
(I.) The Quill diameter of NT40 is 105 mm for 18/860/26 series model. The most of the other builders is only 100 mm)
(J.) Most of the other builders use the same parts for NT40 as the NT30 or R8 milling head. But it's almost different in our machine, we use different parts for NT-40 and NT-30, the key parts particularly (ex : main casting etc., ).
(K.) The Transverse Cutter Bar is one of the standard accessories for 26 series model. (a lot of firm is optional accessories)
4. 20A/B series Machine Features as following
(A.) One piece of spindle which made from SCM-21 alloy steel, carburized, tempered and precision ground. The spindle runs with high precision bearing,P4 class.
(B.) Fitted with forced lubrication system for gears, clutch, and bearings inside the milling head to lower down the running noise and prolong service life of head parts. With an oil level indicator to monitor the oil situation.
(C.) The tilting angle is 45 degrees. Double screw locking device makes the head tighten securely and release conveniently.
(D.) The main casting parts is made of meehanite casting, square design for theY axis and Z axis. Excellentrigidity and stability.
(E.) Adapting over FC 30 and FCD 35casingsQuality, which are fully material analyzed prior to casting. Tempering heat treated for maximum wear resistance without deformation.
(F.) One piece casting of base, column and ram guideway gives superior rigidity without deformation.
(G.) Precision chip wipers protect the X, Y, and Z axis ways for scratch free traverse.
(H.) The X, Y axis slideways, dovetailed surfaces and gibs are coated with Turcite-B, precision scraped for long term accuracy and maximum wear resistance.
(I.) Pre-loaded with double nuts C5 class precision ball screw is installed on X & Y axes ensuring the transmission quality –small backlash & fine positioning.
(J.) An installation space is left for a Y-axis automatic system, providing convenient fitting at any time (Opt Accessories with 20A series model)
(L.) Our X/Y/Z travel is bigger then the other firms.
(M.) Gear Ratio is 1:8.4 (the others is 1:7.3)
| Brand | Gear Ratio | Machine Column of Width |
| Y S | 1 : 8.4 | 320 mm |
| The others | 1 : 7.3 | 280 mm or 300 mm |
Please Note :
I. Our sourced for the all of machine parts from Taiwan and the place of origin is also, expect for Frequency that the brand is Yasukawa from Japan.
II. Our machine with high quality, Machine Features can be better comparison of different with the others brand.
Sales Fields and Cooperation Model( OEM service; Welcom)
So far we are looking for agent around the world,
We hope you are the right one we are looking for, not just being our agent for our cooperation model
We can even provide OEM service for you; WELCOME
We hope you could arrange your business call to our company to see who we are and what we can do for you in the near future; we may discuss our cooperation in person
Should you need more information?
Please feel free to contact us
It will be our pleasure to reply you soon
Kindest Regards
Mr. Su-----International Marketing Consultant.
YS MACHINERY INDUSTRY CO., LTD.
if you don't want to receive our e-mail, please click UnSubscribe
